# Announcing ntopng and Grafana Integration | ntop

> Disclaimer This article is outdated: please see this document for using ntopng with grafana This is to announce the release of the ntopng Grafana datasource t

[Blog](https://www.ntop.org/blog/)[ntopng](https://www.ntop.org/category/ntopng/)

# Announcing ntopng and Grafana Integration

September 27, 20171 min read

## Disclaimer

**This article is outdated: [please see this document](https://github.com/ntop/ntopng/blob/dev/doc/README.grafana) for using ntopng with grafana**

This is to announce the release of the ntopng Grafana datasource that you can [find on the grafana website](https://grafana.com/plugins/ntop-ntopng-datasource). Using this plugin you can create a Grafana dashboard that fetches data from ntopng in a matter of clicks.

To set up the datasource visit Grafana Datasources page and select the green button `Add a datasource`. Select `ntopng` as the datasource `Type` in the page that opens.

The HTTP url must point to a running ntopng instance, to the endpoint `/lua/modules/grafana`. The `Access` method must be set to `Direct`. An example of a full HTTP url that assumes there is an ntopng instance running on `localhost`port `3001` is the following:

`http://localhost:3001/lua/modules/grafana`

Tick `Basic Auth` if your ntopng instance has authentication enabled and specify a username-password pair in fields `User` and `Password`. The pair must identify an ntopng user. Leave the `Basic Auth` checkbock unticked if ntopng has no authentication (`--disable-login`).

Finally, hit the button `Save and Test` to verify the datasource is working properly. A green message `Success: Data souce is working` appears to confirm the datasource is properly set up.

### Supported metrics

Once the datasource is set up, ntopng metrics can be charted in any Grafana dashboard.

Supported metrics are:

-   Interface metrics
-   Host metrics

Metrics that identify an interface are prefixed with a `interface_` that precedes the actual interface name. Similarly, metrics that identify an host are prefixed with a `host_` followed by the actual host ip address.

Interface and host metrics have a suffix that contain the type of metric (i.e., `traffic` for traffic rates and traffic totals or`allprotocols` for layer-7 application protocol rates). The type of metric is followed by the unit of measure (i.e., `bps`for bits per second, `pps` for packets per second, and `bytes`).

#### Interface Metrics

Supported interface metrics are:

-   Traffic rates, in bits and packets per second
-   Traffic totals, both in Bytes and packets
-   Application protocol rates, in bits per second

#### Host Metrics

Supported host metrics are:

-   Traffic rate in bits per second
-   Traffic total in Bytes
-   Application protocol rates in bits per second.

## Keep reading

nDPINov 7, 2026

### [Detecting CVE-2026-98432 using nDPI/ntopng](https://www.ntop.org/detecting-cve-2026-98432-using-ndpi-ntopng/)

CVE-2026-98432 is a critical, 9.8-severity use-after-free (UAF) vulnerability in the Linux kernel’s IPv4 TCP networking stack. It allows an unauthenticated remote attacker to potentially cause system crashes, memory corruption, or execute arbitrary commands with root privileges. From a network stand

[![](/images/2026/09/Screenshot-2026-09-09-151028-1.webp)](https://www.ntop.org/october-20th-join-us-for-the-ntopng-7-0-webinar/)

AnnounceOct 5, 2026

### [October 20th: Join us for the ntopng 7.0 Webinar](https://www.ntop.org/october-20th-join-us-for-the-ntopng-7-0-webinar/)

Is your network monitoring keeping pace with AI, larger infrastructures, and the growing need for real observability? We’re excited to introduce ntopng 7.0, alongside new releases of the rest of the ntop…

[![](/images/2026/09/Screenshot-2026-09-09-163410-1.webp)](https://www.ntop.org/ntopng-user-interface-introducing-the-new-navigation-bar/)

ntopngSep 21, 2026

### [ntopng User Interface: Introducing the New Navigation Bar](https://www.ntop.org/ntopng-user-interface-introducing-the-new-navigation-bar/)

In our continuous effort to improve user experience and make network monitoring more intuitive, we have completely redesigned the ntopng Navigation Bar. As our feature set expands—with crucial additions like the nAnalyst…

## Try it on your own network

Download the free Community edition and see your first flows in five minutes.

[Download ntopng free](https://www.ntop.org/support/documentation/software-installation/)[Talk to an engineer](https://www.ntop.org/support/need-help/contacts/)
Source: https://www.ntop.org/announcing-ntopng-and-grafana-integration/