RTP Plugin ########## This plugin dissects RTP traffic information and saves it in dump files as well export the information via NetFlow/IPFIX using the following information elements. .. code:: bash %RTP_SSRC RTP Sync Source ID %RTP_FIRST_SEQ First flow RTP Seq Number %RTP_FIRST_TS First flow RTP timestamp %RTP_LAST_SEQ Last flow RTP Seq Number %RTP_LAST_TS Last flow RTP timestamp %RTP_IN_JITTER RTP jitter (ms * 1000) %RTP_OUT_JITTER RTP jitter (ms * 1000) %RTP_IN_PKT_LOST Packet lost in stream (src->dst) %RTP_OUT_PKT_LOST Packet lost in stream (dst->src) %RTP_IN_PKT_DROP Packet discarded by Jitter Buffer (src->dst) %RTP_OUT_PKT_DROP Packet discarded by Jitter Buffer (dst->src) %RTP_IN_PAYLOAD_TYPE RTP payload type %RTP_OUT_PAYLOAD_TYPE RTP payload type %RTP_IN_MAX_DELTA Max delta (ms*100) between consecutive pkts (src->dst) %RTP_OUT_MAX_DELTA Max delta (ms*100) between consecutive pkts (dst->src) %RTP_SIP_CALL_ID SIP call-id corresponding to this RTP stream %RTP_MOS RTP pseudo-MOS (value * 100) (average both directions) %RTP_IN_MOS RTP pseudo-MOS (value * 100) (src->dst) %RTP_OUT_MOS RTP pseudo-MOS (value * 100) (dst->src) %RTP_R_FACTOR RTP pseudo-R_FACTOR (value * 100) (average both directions) %RTP_IN_R_FACTOR RTP pseudo-R_FACTOR (value * 100) (src->dst) %RTP_OUT_R_FACTOR RTP pseudo-R_FACTOR (value * 100) (dst->src) %RTP_IN_TRANSIT RTP Transit (value * 100) (src->dst) %RTP_OUT_TRANSIT RTP Transit (value * 100) (dst->src) %RTP_RTT RTP Round Trip Time (ms) %RTP_DTMF_TONES DTMF tones sent (if any) during the call .. note:: As this plugin dissects traffic packets, it is only available when nProbe is used in probe mode.