# HowTo Monitor+nDPI Traffic on Mikrotik Devices Using TZSP | ntop

[Blog](https://www.ntop.org/blog/)[ntop](https://www.ntop.org/category/ntop/)[ntopng](https://www.ntop.org/category/ntopng/)

# HowTo Monitor+nDPI Traffic on Mikrotik Devices Using TZSP

May 23, 20251 min read

Mikrotik devices are very popular in the ntop community. The simplest way to monitor traffic of these devices is using flows as described in [this blog post](https://www.ntop.org/how-to-analyse-mikrotik-traffic-using-ntopng/). However sometimes flows might not be the best choice for various reasons including the inability to perform DPI on the captured traffic.

For full visibility you can use a different option offered by Mikrotik devices. Under Tools -> Packet Sniffer you can export packets over the [TZSP](https://en.wikipedia.org/wiki/TZSP) protocol (it is a sort of remote span protocol): just specify the IP of the remote collector and the collector port (usually 37008).

![HowTo Monitor+nDPI Traffic on Mikrotik Devices Using TZSP, figure 1](/images/2025/05/Screenshot-2025-05-23-at-11.33.15.webp)

The latest nTap version is able to collect TZSP traffic and transform into something ntop (but also Wireshark and other open source) tools can understand. All you need to do is this:

-   \[host 192.168.2.61\] ntap\_remote -t 37008 -c 127.0.0.1:1235 -k hello
-   \[host 192.168.2.61\] sudo ntopng -i ntap:1235:hello

![TZSP](/images/2025/05/TZSP.webp)

As you can see nDPI is now fully operational contrary to Mikrotik exporting flows where this information is not available,

If you want to use TZSP to export packets from Mikrotik devices, you also have the options to use nProbe to collect TZSP packets and transform them into flows. You can achieve this as follows:

-   \[host 192.168.2.61\] nprobe -3 37008 –zmq tcp://127.0.0.1:1235
-   \[host 192.168.2.61\] sudo ntopng -i tcp://127.0.0.1:1235

Enjoy !

**Related:**[nDPI](https://www.ntop.org/products/deep-packet-inspection/ndpi/), [Open source network monitoring](https://www.ntop.org/open-source-network-monitoring/)

## Keep reading

nDPINov 7, 2026

### [Detecting CVE-2026-98432 using nDPI/ntopng](https://www.ntop.org/detecting-cve-2026-98432-using-ndpi-ntopng/)

CVE-2026-98432 is a critical, 9.8-severity use-after-free (UAF) vulnerability in the Linux kernel’s IPv4 TCP networking stack. It allows an unauthenticated remote attacker to potentially cause system crashes, memory corruption, or execute arbitrary commands with root privileges. From a network stand

[![](/images/2026/09/Screenshot-2026-09-09-151028-1.webp)](https://www.ntop.org/october-20th-join-us-for-the-ntopng-7-0-webinar/)

AnnounceOct 5, 2026

### [October 20th: Join us for the ntopng 7.0 Webinar](https://www.ntop.org/october-20th-join-us-for-the-ntopng-7-0-webinar/)

Is your network monitoring keeping pace with AI, larger infrastructures, and the growing need for real observability? We’re excited to introduce ntopng 7.0, alongside new releases of the rest of the ntop…

[![](/images/2026/09/Screenshot-2026-09-09-163410-1.webp)](https://www.ntop.org/ntopng-user-interface-introducing-the-new-navigation-bar/)

ntopngSep 21, 2026

### [ntopng User Interface: Introducing the New Navigation Bar](https://www.ntop.org/ntopng-user-interface-introducing-the-new-navigation-bar/)

In our continuous effort to improve user experience and make network monitoring more intuitive, we have completely redesigned the ntopng Navigation Bar. As our feature set expands—with crucial additions like the nAnalyst…

## Try it on your own network

Download the free Community edition and see your first flows in five minutes.

[Download ntopng free](https://www.ntop.org/support/documentation/software-installation/)[Talk to an engineer](https://www.ntop.org/support/need-help/contacts/)
Source: https://www.ntop.org/howto-monitorndpi-traffic-on-mikrotik-devices-using-tzsp/