# Introducing n2disk 3.2: towards 100 Gbit to disk | ntop

> This is to announce a new n2disk release 3.2. This release, besides addressing a few issues, includes new juicy features: Multithreaded dump and support for m

[Blog](https://www.ntop.org/blog/)[ntop](https://www.ntop.org/category/ntop/)

# Introducing n2disk 3.2: towards 100 Gbit to disk

December 21, 20183 min read

This is to announce a new n2disk release 3.2.

This release, besides addressing a few issues, includes new juicy features:

-   **Multithreaded dump and support for multiple volumes**. This is useful in a few cases:
    -   If you want to record traffic above 30-40 Gbit/s to HDDs or SSDs, you should pay attention to the RAID controller limit. In fact, even if you use many disks in a RAID 0 configurations, many controllers are not able to scale above 30-40 Gbit/s of sustained write throughput. Load-balancing traffic across multiple controllers could be the solution in this case.
    -   If your data retention policy requires you to keep a huge amount of data, in the order of Petabytes, you probably face with another RAID controller limit. For instance, many controllers on the market are able to handle a limited number of disks (often 32) in a single RAID 0 volume. Configuring multiple volumes, even on the same controller, could be the solution in this case.
    -   If you want to record traffic to multiple “slow” volumes, like multiple HDDs without a RAID controller, or Network File Systems, load-balancing and dumping traffic in parallel to multiple volumes could be a good practice to improve the write performance.
    -   If you want to record traffic at really high traffic rates (100 Gbit/s and above), and you decided to use many, fast NVMe SSDs, writing directly to those disks in parallel is probably the way to go. There are enterprise-grade Virtual RAID technologies available on the new Intel Scalable CPUs  specifically designed for NVMe SSDs, however this is not always available.
-   **ZMQ export**. This feature allows you to export traffic statistics and flows information through a ZMQ socket in JSON format. This is useful when recording traffic at high rates on interfaces with exclusive access (like those using PF\_RING ZC or FPGA adapters), but at the same time we want to have visibility on that traffic, on the same box. The ZMQ export lets you deliver data to [ntopng](https://www.ntop.org/products/traffic-analysis/ntopng/) for traffic visualization, in the same way [ntopng is used with nProbe](https://www.ntop.org/guides/ntopng/using_with_nprobe.html).

If you are interested in learning more about this release, below you can find the full changelog:

-   n2disk
    
    -   Support for multithreaded dump to multiple volumes (multiple -o <volume> are allowed, and -w <cores> now accepts a comma-separated list of cores)
    -   Support for interfaces aggregation (comma-separated list of interfaces in -i <interfaces>) also with non-standard interfaces (e.g. ZC/FPGA)
    -   ZMQ support (new options: *–zmq* <socket>, *–zmq-export-flows*) to export traffic stats and flows (compatible with the ntopng ZMQ import)
    -   Pcap files permissions are now set by default to user rw, group r only, to allow only n2disk and the n2disk group to read recorded data
    -   Support for DPI when exporting flows with ZMQ, and add L7 protocol information to the index
    -   Improved CPU utilization on low traffic rate
    -   Improved uburst support
    -   New *–dont-change-user* option to prevent n2disk from changing user
    -   New *–dump-fcs* option to dump the FCS/CRC (when not stripped by the adapter)
    -   Improved /proc stats: added *FirstDumpedEpoch*/*LastDumpedEpoch*/*DumpedBytes* to check the dump window, *CaptureLoops* as watchdog for the capture thread
    -   Ability to specify a file with *\-f/-F* <filter> to provide BPF filters
    -   Improved memory allocation, removed minimum memory allocation
    -   Executing command specified with *–exec-cmd* <script> after pcap and timeline/index have been created
    -   Improved simulation mode: forging real packets to test the index speed, printing stats including AVG capture speed, opening a dummy pf\_ring socket to print statistics
    -   Fixed *–strip-header-bytes*
    -   Fixed volume info parsing in case of long block device name
    -   Fixed root folder creation when dropping privileges
    -   Fixed pcap flushing during termination
    -   Preventing n2disk from failing in case of mlock failure when o-direct is disabled
    -   Fixed file size limit
    -   Fixed segfault on startup binding to the NUMA node
    -   Fixed hardware BPF (on supported adapters) when using bulk mode
-   disk2n
    
    -   New *–takeoff-time|-T* <date and time> option to schedule traffic generation (this can be used to synchronise multiple instances)
-   npcapextract
    
    -   Allow unprivileged users to run extractions as long as they have permissions on the filesystem
    -   Fixed segfault in case of empty pcap files
    -   Fixed extraction of packets not supported by the index (e.g. non IP)
-   Other Tools
    
    -   New uburst\_live tool to detect microbursts on live traffic without recording traffic
    -   Improved n2membenchmark benchmarking tool, added buffer size parameter
    -   Fixed npcapmanage segfault
-   Packages/Misc
    
    -   Packages improvements: reworked user/group creation and removed userdel for security reasons when removing the package
    -   Improved service dependencies, n2disk and disk2n services are now ‘*PartOf*‘ the pf\_ring service
    -   Package for Ubuntu 18
    -   PF\_RING “*timeline*” module extraction fixes and improvements
    -   Fixed init.d PID check, status and is-active

## Keep reading

centoMay 18, 2026

### [Post-Quantum Cryptography (PQC) Analysis](https://www.ntop.org/post-quantum-cryptography-pqc-analysis/)

Modern digital security relies on public-key encryption (like RSA and ECC) to protect global data. The future arrival of a Cryptographically Relevant Quantum Computer (CRQC) will completely break these mathematical foundations. To…

ntopJul 11, 2025

### [New, Fast, Scalable ClickHouse Integration for High-Volume Networks](https://www.ntop.org/new-fast-scalable-clickhouse-integration-for-high-volume-networks/)

When it comes to monitoring very large networks and the flows’ cardinality reaches into the billions, the performance of historical data storage and query systems becomes a critical bottleneck. Network operators, analysts,…

ntopJun 30, 2025

### [Network Visibility and Observability: ntopng vs SNMP+](https://www.ntop.org/network-visibility-and-observability-ntopng-vs-snmp/)

Recently, we’ve encountered users with high monitoring requirements. Some users need to monitor 1,000 routers and want to know who are the top talkers or top protocols. Others have a network with…

## Try it on your own network

Download the free Community edition and see your first flows in five minutes.

[Download ntopng free](https://www.ntop.org/support/documentation/software-installation/)[Talk to an engineer](https://www.ntop.org/support/need-help/contacts/)
Source: https://www.ntop.org/introducing-n2disk-3-2-towards-100-gbit-to-disk/