# Introducing n2disk 3.4: 100 Gbit Traffic Dump to Disk | ntop

> This is to announce a new n2disk release 3.4. In addition to major performance optimisations with FPGA-based NICs, this release adds new interesting features

[Blog](https://www.ntop.org/blog/)[n2disk](https://www.ntop.org/category/n2disk/)

# Introducing n2disk 3.4: 100 Gbit Traffic Dump to Disk

January 7, 20201 min read

This is to announce a new [n2disk](https://www.ntop.org/products/traffic-recording/n2disk/) release 3.4. In addition to major performance optimisations with FPGA-based NICs, this release adds new interesting features including the ability to filter traffic based on the application protocol, aggregate traffic from multiple (2+) ZC interfaces, a better disk space management in case of multiple output folders (also from the same volume), and other useful options.

With the current n2disk release and adequate storage, it is now possible on FPGA-based NICs to dump up over 40 Gbit of traffic with a single n2disk instance. This means that if you want to dump 100 Gbit to disk using NVMEs, you can now start 3 n2disk instances each dumping on a separate disk partition a portion of the ingress traffic. With npcapextract you can the aggregate the dumped traffic into a single pcap file.

Enjoy!

## Changelog

-   n2disk
    -   New –l7-filter-conf option to enable l7 filtering (based on FT)
    -   New –time-pulse-precision option to lower CPU load when high-precision is not required
    -   Bulk/segment mode capture optimizations and fixes
    -   Add support for multiple (more than 2) ZC interfaces
    -   Add support for interface index encoding in timestamp (LSB)
    -   Improve ‘–disk-limit’ support to take into account multiple folders from the same volume
    -   Improve exported flows (ZMQ) in JSON/TLV format, add PEN
    -   Improve disk utilization monitoring
    -   New option –kernel-cluster-id|-K to set a kernel cluster
    -   Improve egress queue flushing when idle with –export-flow-offload
    -   Improve /proc stats, add number of exported flows and timeline path
    -   Fix exported stats (ZMQ) JSON format
    -   Fix for mountpoints with no device (e.g. NFS)
    -   Fix storage status check on NFS without no\_root\_squash
    -   Fix disk limit check when indexing is not enabled
-   disk2n
    -   Add support for interface index encoding in timestamp (LSB) to select the egress interface
    -   Add fully-cached mode to avoid continuously reading from disk when full pcap fits in memory
-   npcapextract
    -   Increased max number of timelines from 10 to 16
    -   New -C <num> option to stop extraction after <num> packets
    -   Fix for filesystems with no I\_DIRECT support
    -   Improve permission check
-   Misc
    -   Add -T option to print first/last TS only to npcapprintindex
    -   Add more options to control n2membenchmark

## Keep reading

n2diskJan 7, 2025

### [Introducing n2disk 3.8: NVIDIA Support, Smart Recording, Traffic Deduplication](https://www.ntop.org/introducing-n2disk-3-8-nvidia-support-smart-recording-traffic-deduplication/)

We’re excited to announce a new stable release of n2disk v. 3.8. This release is bringing significant new capabilities to the network monitoring and recording landscape, and it is packed with features…

n2diskJul 1, 2024

### [Howto Build a (Cheaper) 100 Gbit Continuous Packet Recorder using Commodity Hardware](https://www.ntop.org/howto-build-a-cheaper-100-gbit-packet-recorder-using-commodity-hardware/)

Those who follow this blog probably read a few posts where we described how to build a 100 Gbit continuous packet recorder using n2disk and PF\_RING, providing specs for recommended hardware and…

AnnounceMay 2, 2023

### [Introducing Smart Recording in n2disk: Combining Cybersecurity with Packet-to-Disk](https://www.ntop.org/introducing-smart-recording-in-n2disk-combining-cybersecurity-with-packet-to-disk/)

In short Continuous network traffic recorders are applications (or appliances) that write network traffic on disk. In case of issues (e.g. security breach or network outage) they enable network and security analysts…

## Try it on your own network

Download the free Community edition and see your first flows in five minutes.

[Download ntopng free](https://www.ntop.org/support/documentation/software-installation/)[Talk to an engineer](https://www.ntop.org/support/need-help/contacts/)
Source: https://www.ntop.org/introducing-n2disk-3-4-100-gbit-traffic-dump-to-disk/