As most of you know, nProbe has recently added NetFlow-Lite support in 6.5 release. NetFlow-Lite is a protocol that brings you visibility into switched networks, similar to what NetFlow “classic” is doing on routed networks. As this technology is pretty new, perhaps you might be interested in hearing more about it right from the source. […]
Using nProbe as NetFlow-Lite Cache
As previously stated on this blog, we have worked tightly with Cisco as nProbe has been selected as reference implementation for NetFlow-Lite flow conversion. Although NetFlow-Lite support has been added to nprobe since version 6.1.4 and it’s available on all supported platforms (both Unix and Windows), with nProbe 6.5 (just released) we have moved NetFlow-Lite […]
How to Monitor Latency Using nProbe
On May 12th in Bolzano (I) at the Nagios World Conference Europe, I will give a speech about network and application latency monitoring using nProbe. This is an hot topic, in particular for those who think of NetFlow/IPFIX as just a way to count bytes and packets. NetFlow/IPFIX instead is (this is my opinion) an […]
Tuning nProbe 6.4 Scalability and Performance
Release 6.3 of nprobe targeted IPFIX compatibility. In release 6.4.x (just introduced) the main focus has been on scalability and performance. Until 6.3, the nProbe architecture was not really exploiting multicore systems, due to heritage of previous versions. With this release nProbe reaches a new level as you can see from the graph below (traffic […]
nProbe complies with the IPFIX specification
Last week I have participated to an IPFIX interoperability event held in Prague, right before the IETF 80. In the picture below you can see me between Benoit Claise (Cisco, one of the IPFIX/NetFlow fathers) and Jiri Novotni (Invea-Tech). nProbe 6.3.x has been successfully tested against all the available implementations including Vermont, SiLK, nfdump/IPFIX (Cesnet). nProbe […]
nProbe IPFIX Interoperability Tests
Over the past month quite a lot of effort has been put on the IPFIX side of nProbe. Recently, nProbe has been successfully verified by Juniper as an IPFIX (in addition to v9) collector for flows generated by Juniper MX routers, and Cisco Catalyst 4948E switches. In order to further guarantee users that nProbe respects the […]
Say hello to NetFlow-Lite (NFLite)
As you all know, NetFlow has been initially designed for routers (or L3 switches if you wish), contrary to sFlow that instead has been deployed mostly on switches. In this view, people use NetFlow just for monitoring internet traffic, as NetFlow is not supported across the product portfolio due to dedicated ASIC required. NetFlow-lite (first […]
Cisco(Live) and ntop
Just like Apple is the computer brand I use since 1985, for me Cisco is the networking company, the one that created the first routers and switches on which the Internet was built. It has been a great surprise when last summer I have been contacted by a Cisco representative, who has asked me whether I […]
HTTP Traffic Analysis Using nProbe and Scrutinizer
Are you interested in getting URL information from NetFlow? The nProbe NetFlow probe or the nBox can do it. Paul at Plixer International recently wrote a blog on Recommended nProbe Templates. For a foundation on this topic, check out his blog. As an extension of his blog, I’ll explain how to get URLS from the […]
Latency using NetFlow from the nProbe: Part 1
nProbe v6 features both network and application latency measurement. Our partner Ravica has written a nice tutorial on this subject.